Enclosure not stated
K-Buffer
Based on the Klon Buffer· 3 other boards clone it
- Category
- Utility· Buffers
- Price
- £3.00in stock
From the vendor
It’s a small build, designed to be set and forget, always on – but you can add a footswitch and LED If you wanted…but there’s not really any point!
Buffers are one of those “do I really need one” type things – well..once you’ve tried one…you’ll realise that you do, and how your guitar should sound – recover that top end that gest sucked away in meters of cables and pedal chains.
Some people put one at the start of their chain and one at the end to really make that signal shine!
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 12 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 6 | ||||
| R1 | 100K | 100k | 0.25 Watt Resistor | |
| R2 | 100K | 100k | 0.25 Watt Resistor | |
| R5 | 100K | 100k | 0.25 Watt Resistor | |
| R3 | 1M | 1M | 0.25 Watt Resistor | |
| R4 | 560R | 560 | 0.25 Watt Resistor | |
| CLR1 | 4.7K | 4.7k | 0.25 Watt Resistor | |
| Capacitors 3 | ||||
| C1 | 47uF | 47u | CP Radial D5.0mm P2.00mm | |
| C3 | 1uF | 1u | CP Radial D5.0mm P2.00mm | |
| C2 | 100nF | 100n | C Rect L7.0mm W2.0mm P5.00mm | |
| Diodes 1 | ||||
| D1 | 1N4001 | 1N4001 | Standard Diode | |
| ICs 1 | ||||
| U1 | TL072 | TL072 | DIP-8 W7.62mm | |
| LEDs 1 | ||||
| LED | 3MM LED | 3MM LED | LED D3.0mm | |
Other boards based on the Klon Buffer
- Micro Buffer Effects Layouts · $3.00
- Betterizer On The Road Effects · 1590B · $8.00
- Dolly Buffer Sheepylove · €5.00