Akashic Guitar effects circuit lookup

1590A

Effects Layouts (blog)

Klon BufferVerified

Based on the Klon Centaur· 49 other boards clone it

Category
Utility
Build
Perfboard
Layout
Verified · Effects Layouts (blog) marks it as built and working
Tags
Buffer, Klon
Open the layout at Effects Layouts (blog)

From the post

Who doesn't love a Klon, right? Here's the buffer stage of the Centaur. The original Klon uses one side of a TL072 for the buffer and the other for gain stage. If you're building the just the buffer, you can get away with a TL071. I've laid out a perf and PCB for each.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.

Parts list 8 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Check before you build · 1 value the reader of this layout was not sure of
  • Small electrolytic bottom right (rows F-G, column I): read as .1uF (0.1uF), a small square dot precedes the 1; it could be a polarity mark, making it 1uF
RefValueNormalizedTypeNotes
Resistors 3
×3100K100kread from the layout by eye
×11M1Mread from the layout by eye
×1560Ω560read from the layout by eye
Capacitors 3
×1100nF100nread from the layout by eye
×147uF47uelectrolytic; read from the layout by eye
×10.1uF100nelectrolytic; printed .1uF; read from the layout by eye
Diodes 1
×11N40011N4001printed 4001; read from the layout by eye
ICs 1
×1TL072TL072alternative version of the board uses a TL071; read from the layout by eye

Other boards based on the Klon Centaur