Akashic Guitar effects circuit lookup

1590A

Effects Layouts (blog)

Dual Klon BufferVerified

Based on the Klon Centaur· 49 other boards clone it

Category
Utility
Build
Perfboard
Layout
Verified · Effects Layouts (blog) marks it as built and working
Tags
Buffer, Klon
Open the layout at Effects Layouts (blog) Drilling template

From the post

In an effort to make my own personal pedal board better, I'm building buffers at the input and output of my signal chain. As space and DC jacks are always a premium, I thought to build a dual buffer in a 1590A enclosure. The Klon Buffer is great and since it only uses half of a TL072, I figured I could just use the other half for the second buffer. It's a little tight depending on the jacks you use, but the board is small enough to mount vertically to an inside wall of a 1590A while the wall opposite can mount the 4 input/output jacks. Here's my drilling template to better illustrate.

And here are a few pics of my build.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.

Parts list 9 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 3
×4100K100kread from the layout by eye
×21M1Mread from the layout by eye
×2560Ω560read from the layout by eye
Capacitors 4
×2100nF100nread from the layout by eye
×21uF1uelectrolytic; read from the layout by eye
×110uF10uelectrolytic; read from the layout by eye
×147uF47uelectrolytic; read from the layout by eye
Diodes 1
×11N58171N5817read from the layout by eye
ICs 1
×1TL072TL072read from the layout by eye

Other boards based on the Klon Centaur