Enclosure not stated · 4 knobs
One Punch
Based on the Greer Amps Sucker Punch· 1 other board clones it
- Category
- Overdrive
- Controls
- Bias · Gain · Tone · Vol
- Price
- £4.00in stock
From the vendor
The One Punch is our take on the Greer Amps Sucker Punch Clone
An overdrive that doesn’t cram too much into one pedal and has 3 simple controls – Gain, Tone and Volume. The tone sweep goes from really thick OD to cutting, sharp tones. Think early JCM tones in a super small parts count build.
Controls:
• Gain
• Tone
• Volume
Note: Remember to socket any IC’s and transistors!
Compares to: Greer Amps Sucker Punch
Schematic
The schematic is in the vendor's build document, page 1. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 18 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 3 | ||||
| R1 | 2M2 | 2.2M | 0.25 Watt Resistor | |
| R2 | 1K5 | 1.5k | 0.25 Watt Resistor | |
| R3 | 10K | 10k | 0.25 Watt Resistor | |
| Capacitors 7 | ||||
| C5 | 22uF | 22u | CP Radial D5.0mm P2.00mm | |
| C6 | 22uF | 22u | CP Radial D5.0mm P2.00mm | |
| C1 | 100uF | 100u | CP Radial D5.0mm P2.00mm | |
| C2 | 22pF | 22p | C Disc D4.3mm W1.9mm P5.00mm | |
| C4 | 10nF | 10n | C Rect L7.0mm W2.0mm P5.00mm | |
| C7 | 10nF | 10n | C Rect L7.0mm W2.0mm P5.00mm | |
| C3 | 100nF | 100n | C Rect L7.0mm W2.0mm P5.00mm | |
| Diodes 1 | ||||
| D1 | 1N4001 | 1N4001 | Standard Diode | |
| Transistors 1 | ||||
| Q1 | J201 | J201 | TO-92 Inline Wide-large-solderpads | |
| ICs 1 | ||||
| U1 | LM386 | LM386 | DIP-8 W7.62mm Socket | |
| Potentiometers 4 | ||||
| BIAS1 | 100K | 100k | 6mm-Trim-Pot | |
| GAIN | A1M | A1M | Potentiometer Alpha just holes | |
| TONE | B100K | B100k | Potentiometer Alpha just holes | |
| VOL | A250K | A250k | Potentiometer Alpha just holes | |
| Other 1 | ||||
| G*** | LOGO | LOGO | domain-18mm | |
Other boards based on the Greer Amps Sucker Punch
- Sucker Punch PCBWay: Glory to Ukraine