Akashic Guitar effects circuit lookup
VOLUME

Enclosure not stated · 1 knob

Tagboard Effects

HAO Rust DriverVerified

Based on the HAO Rust Driver· 6 other boards clone it

Category
Distortion
Controls
Volume
Build
Vero· 16×8· 9 cuts, 5 links
Layout
Verified · Tagboard Effects marks it as built and working
Tags
Distortion, HAO
Open the layout at Tagboard Effects

From the post

Update 27-02-2012 - I'm keeping these online so that all previous versions remain accessible, but I suggest anyone wanting to build this does so using the new updated layout which can be found here.

and the later version with a 3 position tone switch

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.

Parts list 13 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Check before you build · 1 value the reader of this layout was not sure of
  • Pot name: the drawing gives no knob name for the 500K Lin pot; 'Volume' is inferred from its wiring to Output and Ground
RefValueNormalizedTypeNotes
Resistors 6
×3100K100kread from the layout by eye
×1330K330kread from the layout by eye
×147K47kread from the layout by eye
×122K22kread from the layout by eye
×11K1kread from the layout by eye
×1470K470kread from the layout by eye
Capacitors 3
×156n56nread from the layout by eye
×2100n100nread from the layout by eye
×11n21.2nread from the layout by eye
Diodes 2
D11N41481N4148legend: silicon 1N4148 or similar; read from the layout by eye
D21N41481N4148legend: silicon 1N4148 or similar; read from the layout by eye
ICs 1
IC1JRC4558JRC4558legend: Dual opamp, JRC4558, TL072, LF353 etc; read from the layout by eye
Potentiometers 1
VolumeB500KB500kPotentiometerunnamed in the drawing, printed 500K Lin; read from the layout by eye

Other boards based on the HAO Rust Driver