125B · 2 knobs
PedalPCB· PCB653
Corroder Overdrive
Based on the HAO Rust Driver
- Category
- Distortion
- Controls
- Volume · Tone
- Price
- $8.00in stock
- Tags
- 125B
From the vendor
Controls
• Volume
• Tone (Toggle switch)
Specifications
• Designed for a 125B enclosure with top-mounted jacks
Documentation
Schematic
The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 25 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 10 | ||||
| R1 | 1M | 1M | Resistor, 1/4W | |
| R2 | 10K | 10k | Resistor, 1/4W | |
| R3 | 33K | 33k | Resistor, 1/4W | |
| R4 | 470K | 470k | Resistor, 1/4W | |
| R5 | 10K | 10k | Resistor, 1/4W | |
| R6 | 1K | 1k | Resistor, 1/4W | |
| R7 | 47K | 47k | Resistor, 1/4W | |
| R100 | 4K7 | 4.7k | Resistor, 1/4W | * LED current limiting resistor |
| R101 | 100K | 100k | Resistor, 1/4W | |
| R102 | 100K | 100k | Resistor, 1/4W | |
| Capacitors 9 | ||||
| C1 | 56n | 56n | Film capacitor, 7.2 x 2.5mm | |
| C2 | 22p | 22p | Ceramic capacitor | |
| C3 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C4 | 1n2 | 1.2n | Film capacitor, 7.2 x 2.5mm | |
| C5 | 680p | 680p | Ceramic capacitor | |
| C6 | 100n | 100n | Film capacitor, 7.2 x 2.5mm | |
| C7 | 3n3 | 3.3n | Film capacitor, 7.2 x 2.5mm | |
| C100 | 100u | 100u | Electrolytic capacitor, 5mm | |
| C101 | 47u | 47u | Electrolytic capacitor, 5mm | |
| Diodes 3 | ||||
| D1 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D2 | 1N4148 | 1N4148 | Signal diode, DO-35 | |
| D100 | 1N5817 | 1N5817 | Schottky diode, DO-41 | |
| ICs 1 | ||||
| IC1 | JRC4558D | JRC4558D | Dual op-amp, DIP8 | |
| Potentiometers 1 | ||||
| VOLUME | B500K | B500k | 16mm right-angle PCB mount pot | |
| Switches 1 | ||||
| TONE | ON/OFF/ON | ON/OFF/ON | Toggle switch, SPDT | 3-position (ON/OFF/ON) |