Semi-Sweet Distortion

Based on the Cornish SS-2· 2 other boards clone it

From the vendor

Controls

• Volume

• Tone

• Sustain

Specifications

• Designed for a 125B enclosure with top-mounted jacks

The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.

Ref	Value	Normalized	Type	Notes
Resistors 17
R1	1M	1M	Resistor, 1/4W
R2	10K	10k	Resistor, 1/4W
R3	510R	510	Resistor, 1/4W
R4	1M	1M	Resistor, 1/4W
R5	150K	150k	Resistor, 1/4W
R6	10K	10k	Resistor, 1/4W
R7	100K	100k	Resistor, 1/4W
R8	1M	1M	Resistor, 1/4W
R9	1M	1M	Resistor, 1/4W
R10	2K4	2.4k	Resistor, 1/4W
R11	10K	10k	Resistor, 1/4W
R12	6K8	6.8k	Resistor, 1/4W
R13	10K	10k	Resistor, 1/4W
R14	91R	91	Resistor, 1/4W
R100	150K	150k	Resistor, 1/4W
R101	180K	180k	Resistor, 1/4W
CLR	4K7	4.7k	Resistor, 1/4W	* LED current limiting resistor
Capacitors 15
C1	4n7	4.7n	Film capacitor, 7.2 x 2.5mm
C2	10n	10n	Film capacitor, 7.2 x 2.5mm
C3	1n	1n	Film capacitor, 7.2 x 2.5mm
C4	470n	470n	Film capacitor, 7.2 x 5.0mm
C5	10p	10p	Ceramic capacitor
C6	1u	1u	Film capacitor, 7.2 x 5.0mm
C7	10n	10n	Film capacitor, 7.2 x 2.5mm
C8	10n	10n	Film capacitor, 7.2 x 2.5mm
C9	10n	10n	Film capacitor, 7.2 x 2.5mm
C10	220n	220n	Film capacitor, 7.2 x 5.0mm
C11	10u	10u	Electrolytic capacitor, 5mm
C12	1n	1n	Film capacitor, 7.2 x 2.5mm
C13	22u	22u	Electrolytic capacitor, 5mm
C100	100u	100u	Electrolytic capacitor, 5mm
C101	10u	10u	Electrolytic capacitor, 5mm
Diodes 3
D1	GE	GE	Germanium diode	(1N34A, 1N270, D9E, D9B, etc)
D2	GE	GE	Germanium diode	(1N34A, 1N270, D9E, D9B, etc)
D100	1N5817	1N5817	Schottky diode, DO-41
ICs 2
IC1	LM741	LM741	Single op-amp, DIP8
IC2	LM741	LM741	Single op-amp, DIP8
Potentiometers 3
VOLUME	A10K	A10k	16mm right-angle PCB mount pot
TONE	B20K	B20k	16mm right-angle PCB mount pot
SUSTAIN	B50K	B50k	16mm right-angle PCB mount pot