Rodent distortion

From the vendor

The Rat is worthy of a place on any pedalboard, and comes in several flavours to satisfy most tastes. This kit has spots for two separate clipping diode pairs so you can switch between two different models in an instant, though one pair can be hardwired if you want to ditch that option. Diodes are supplied for the Standard model (silicon) and Turbo (LEDs) as standard, with the germamiums for the You Dirty model being optional. Kit is supplied with OP07. Our stash of vintage LM308 is gone. The kit is supplied with vertical-mount pots which have round shafts, so you'll need set-screw fitting knobs. IMPORTANT NOTE: You can't build a three-knob version with vertical mount pots AND use the board-mounted clipping selection switch. For a three-knob version with clipping selection you have to wire the switch. Sorry. If you go for vertical pots please note they have a round shaft - you'll need knobs with set-screw fitting. If you want the PCB without parts there's a link for that at the bottom of the page. Partial kit: PCB, all board-mounted components (depending on selected options), pots. Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED. Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included. Builds are only available with full kits including enclosure and vertical-mount pots. Please choose appropriate knobs. Inspired by: Rat Difficulty: Medium PCB size: 50 x 50mm Knobs required: 3 or 4 Enclosure: 1590B Direct-Connect compatible (4-way) Download INSTRUCTION PDF