Akashic Guitar effects circuit lookup
SUSTAINLEVELTONE

Enclosure not stated · 3 knobs

turretboard.org

Aria Super Fuzz Sustainer RE-203

Based on the Univox Super-Fuzz· 37 other boards clone it

Category
Fuzz
Controls
Sustain · Level · Tone
Build
Vero· 21×10
Tags
0.1″ pitch stripboard

From the post

Aria… Blast from the past. My first playable guitar was Aria brand back in early 90’s. The blue pearl Ibanez RG series ripoff.

This old school fuzz unit is kind of ripoff too. Closely based on EHX Big Muff Pi, minus output buffer.

All caps are ceramic in original RE-203, and my layout is designed to easily accommodate 2,5mm 560pF ceramics and 5mm raster caps for anything above.

You may bitching me for stand up resistors again, bud hey! RE-203 have them all that way.

Transistors are at this point unknown to me, I did my layout for common pin-out NPN silicon devices, use your favorite BMP trannies

Have fun

Get your project file copy here

Pawel

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at turretboard.org. No KiCad fragment has been drawn for this circuit yet.

Parts list 20 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 10
×2100R100
×1150R150
×28,2K8.2k
×110K10k
×112K12k
×218K18k
×339K39k
×382K82k
×1100K100k
×3390K390k
Capacitors 6
×3560pF560p
×15nF5n
×16,8nF6.8n
×115nF15n
×250nF50n
×5100nF100n
Diodes 1
×41N9141N914
Potentiometers 3
SustainA100KA100k
LevelA100KA100k
ToneA100KA100k

Other boards based on the Univox Super-Fuzz