Enclosure not stated · 2 knobs
VOX Tone Bender (JEN Fuzz)
Based on the Vox Tone Bender· 3 other boards clone it
From the post
VOX Tone Bender – or JEN Fuzz, those are the same. I made vero layout that matches PCB pattern, for those who (like me) don’t like to play with chemicals at home. Component values matches my JEN unit. I’ve seen some differences in other VOX/JEN units, like 15uF electros, or different input cap values, but the ones listed in .pdf are most common from those I’ve seen. I’ve made my document with Tropical Fish Caps in mind, if you’re going to use other (axial) caps this can be easily modificated, just move the line, and the trace cuts as I did in my clone below. If you need assistance, @ me.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at turretboard.org. No KiCad fragment has been drawn for this circuit yet.
Parts list 10 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| ×1 | 820 | 820 | ||
| ×1 | 2,2K | 2.2k | ||
| ×1 | 8,2K | 8.2k | ||
| ×1 | 10K | 10k | ||
| ×1 | 47K | 47k | ||
| Capacitors 3 | ||||
| ×1 | 0,0032uF | 3.2n | ||
| ×1 | 0,22uF | 220n | ||
| ×1 | 25uF | 25u | ||
| Potentiometers 2 | ||||
| Attack | B1K | B1k | ||
| Level | A50K | A50k | ||
Other boards based on the Vox Tone Bender
- Vox Tone Bender Experimentalists Anonymous
- Vox Tone Bender Revolution Deux
- Vox Tone Bender Tagboard Effects