Enclosure not stated
Lovepedal Eternity Burst
Based on the Lovepedal Eternity Burst· 5 other boards clone it
From the post
New version of one of my very first OD layouts. The old file was trashed, this one lay down better in my opinion
Presented layout is for “Burst” version
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at turretboard.org. No KiCad fragment has been drawn for this circuit yet.
Parts list 3 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Only the parts the layout names in its legend are listed: the active parts and the pots. The resistor and capacitor values are printed on the parts in the drawing.
ocr read from an image · sch paired from the schematic · fixed corrected by hand. Check marked values against the build document.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Potentiometers 3 | ||||
| Drive | A500Kocr | A500k | from the layout legend | |
| Glass | B5Kocr | B5k | from the layout legend | |
| Vol | A500Kocr | A500k | from the layout legend | |
Other boards based on the Lovepedal Eternity Burst
- Eternity Burst overdrive PCBWay: Glory to Ukraine
- Eternal Burst PedalPCB · 125B · $8.00
- Lovepedal Eternity Burst Revolution Deux
- Lovepedal Eternity Burst Tagboard Effects
- Lovepedal Eternity Burst - SIP8 inline opamp Tagboard Effects