Enclosure not stated · 3 knobs

Eternity Burst overdrive

Based on the Lovepedal Eternity Burst· 5 other boards clone it

Schematic

The schematic image is on the project page. Open it at PCBWay.

Ref	Value	Normalized	Type	Notes
Resistors 7
×2	1M	1M		read from the schematic by eye
×2	1k	1k		read from the schematic by eye
×2	330	330		one in the tone leg, one on the supply; read from the schematic by eye
×2	10k	10k		read from the schematic by eye
×1	20k	20k		read from the schematic by eye
×1	3k3	3.3k		read from the schematic by eye
×1	4k7	4.7k		LED resistor; read from the schematic by eye
Capacitors 6
×2	100n	100n		read from the schematic by eye
×2	47u	47u		electrolytic; read from the schematic by eye
×1	47n	47n		read from the schematic by eye
×1	220n	220n		read from the schematic by eye
×1	150n	150n		read from the schematic by eye
×1	10u	10u		electrolytic; read from the schematic by eye
Diodes 2
×4	1N914	1N914		two series pairs in the feedback loop; read from the schematic by eye
×1	1N5817	1N5817		read from the schematic by eye
ICs 1
×1	4558	4558		dual op-amp, both sections used; read from the schematic by eye
Potentiometers 3
Drive	B500k	B500k	Potentiometer	read from the schematic by eye
Tone	B5k	B5k	Potentiometer	read from the schematic by eye
Level	A500k	A500k	Potentiometer	read from the schematic by eye