Akashic Guitar effects circuit lookup
TREBLEBOOSTVOLUME

Enclosure not stated · 3 knobs

Tagboard Effects

Mad Professor Ruby Red BoosterVerified

Based on the Mad Professor Ruby Red Booster· 2 other boards clone it

Category
Boost
Controls
Treble · Boost · Volume
Build
Vero· 15×8· 7 cuts, 2 links
Layout
Verified · Tagboard Effects marks it as built and working
Tags
BJF/MP, Booster, Overdrive

From the post

A nice versatile booster here by Bjorn, with switchable buffered or true bypass switching. I have kept the buffer separate so those who just intend to use it true bypass don't have to bother with the extra components or board size.

Manufacturers info:

BJF design guitar booster/treble booster pedal with master volume

Mad Professor Ruby Red Booster (RRB) is a combination of two boosters and a switchable buffer.

The two boosters are based on the much sought after BJF Little Red Trebler and Red Rooster Booster, connected in that order and with a master volume control.

The RRB can be used as a treble booster, a clean boost or an overdrive unit or any combination of the above. Inside the pedal there is a switch for a high quality buffer. You can set the pedal for true bypass mode or "buffer on" in bypass mode. The Treble Booster is a fine-tuned booster for just the right treble frequency with carefully designed bandwidth and an optimized slope of bass cut.

The booster circuit is designed to overdrive the amplifier inputs from nice shimmer to heavy overdrive, thanks to the massive 40dB of boost. The booster is tuned so that it produces musical distortion by itself on higher boost settings.

You can control the total level of the two boosters with the Master Volume control and also use the Master Volume to achieve distortion from the unit.

The easy to use Mad Professor Ruby Red Booster must be the most versatile high quality booster on market. Build the Mad Professor way: small footprint and big tone.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.

Parts list 30 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Check before you build · 3 values the reader of this layout was not sure of
  • 14K7 (nine of them on the booster board): printed clearly, unusual value
  • 2K61 on the booster board left of Q1: printed clearly, unusual value
  • Volume pot: the legend calls it Volume 50K Log, the board wires are labelled Master 1-3
RefValueNormalizedTypeNotes
Resistors 12
×24K74.7kread from the layout by eye
×3470R470read from the layout by eye
×914K714.7kread from the layout by eye
×31M1Mread from the layout by eye
×1470K470kread from the layout by eye
×12K612.61kread from the layout by eye
×12K2kread from the layout by eye
×11K51.5kread from the layout by eye
×16K86.8kread from the layout by eye
×32M22.2Mread from the layout by eye
×147K47kread from the layout by eye
×11K1kread from the layout by eye
Capacitors 8
×2100p100pread from the layout by eye
×31n1nread from the layout by eye
×14n74.7nread from the layout by eye
×347n47nread from the layout by eye
×2470n470nread from the layout by eye
×31u1uread from the layout by eye
×322u22uelectrolytic; read from the layout by eye
×1100u100uelectrolytic; read from the layout by eye
Diodes 1
D11N40011N4001read from the layout by eye
Transistors 4
Q12N59522N5952JFET; read from the layout by eye
Q22N59522N5952JFET; read from the layout by eye
Q32N59522N5952JFET; read from the layout by eye
Q42N59522N5952JFET; read from the layout by eye
ICs 1
ICNE5534NE5534buffer board; read from the layout by eye
Potentiometers 3
TrebleB50KB50kPotentiometerread from the layout by eye
BoostA500KA500kPotentiometerread from the layout by eye
VolumeA50KA50kPotentiometerwires labelled Master; read from the layout by eye
Switches 1
True Bypass / BufferDPDT on/onDPDT ON/ONtoggle; read from the layout by eye

Other boards based on the Mad Professor Ruby Red Booster