The Gent Overdrive

Based on the Lovepedal Englishman Overdrive· 1 other board clones it

From the vendor

Controls

• Volume

• Gain

• Fail (Toggle switch)

Specifications

• Designed for a 125B enclosure with top-mounted jacks

Documentation

The schematic is in the vendor's build document, page 3. Open the build document. No KiCad fragment has been drawn for this circuit yet.

Ref	Value	Normalized	Type	Notes
Resistors 8
R1	2M2	2.2M	Resistor, 1/4W
R2	470K	470k	Resistor, 1/4W
R3	2M2	2.2M	Resistor, 1/4W
R4	100R	100	Resistor, 1/4W
R5	3K3	3.3k	Resistor, 1/4W
R6	330R	330	Resistor, 1/4W
R7	330R	330	Resistor, 1/4W
R100	4K7	4.7k	Resistor, 1/4W
Capacitors 5
C1	470n	470n	Film capacitor, 7.2 x 5.0mm
C2	100n	100n	Film capacitor, 7.2 x 2.5mm
C3	47u	47u	Electrolytic capacitor, 5mm
C4	220n	220n	Film capacitor, 7.2 x 5.0mm
C100	47u	47u	Electrolytic capacitor, 5mm
Diodes 5
D1	1N914B	1N914B	Signal diode, DO-35
D2	1N914B	1N914B	Signal diode, DO-35
D3	BAT46	BAT46	Signal diode, DO-35
D4	BAT46	BAT46	Signal diode, DO-35
D100	1N5817	1N5817	Schottky diode, DO-41
Transistors 1
Q1	2N5088	2N5088	BJT transistor, NPN TO-92
Potentiometers 2
VOLUME	B100K	B100k	16mm right-angle PCB mount pot
GAIN	B1K	B1k	16mm right-angle PCB mount pot
Switches 1
FAIL	SPDT	SPDT	Toggle switch, SPDT	3-position (ON/OFF/ON)