125B · 5 knobs
PedalPCB· PCB046
Angry Andy
Based on the JHS Andy Timmons Drive· 1 other board clones it
- Category
- Distortion
- Controls
- Volume · Drive · EQ · Air · Headroom (Toggle)
- Price
- $8.00in stock
- Tags
- 125B
From the vendor
Overview
A very flexible distortion box that can go from low to high gain with the twist of your guitar knob. Three
selectable compression and gain levels really add to the amount of options you have. Run it into a high
headroom clean amp like its endorser and play all of your guitar instrumentals or favorite grease hits.
Controls
• Volume – Controls the overall output
• Drive – Controls the amount of gain in the circuit
• EQ – Brighten your sound by turning it to the right and darken to the left
• Air – This is like an amplifiers presence knob, it handles the high frequencies. This can get really bright
when turned all the way to the right.
• Headroom (Toggle) – Toggles between three different “wattage” settings (25W, 50W, 100W)
The toggle switch changes the compression and therefore affects the gain. In the middle
position it is wide open and very natural sounding. In the up position it is highly compressed and the
volume will need to be compensated as such. In the down position it is a middle ground between the
two and is great for tighter rhythms.
Specifications
• Designed for a 125B enclosure with top-mounted jacks
Downloads
Schematic
The schematic is in the vendor's build document. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 33 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 11 | ||||
| R1 | 1M | 1M | ||
| R2 | 1K | 1k | ||
| R3 | 1M | 1M | ||
| R5 | 1K | 1k | ||
| R6 | 1K | 1k | ||
| R7 | 10K | 10k | ||
| R8 | 1M | 1M | ||
| R9 | 470 | 470 | ||
| R100 | 4K7 | 4.7k | ||
| R101 | 22K | 22k | ||
| R102 | 22K | 22k | ||
| Capacitors 12 | ||||
| C1 | 22n | 22n | ||
| C2 | 1n | 1n | ||
| C3 | 100p | 100p | ||
| C4 | 220n | 220n | ||
| C5 | 100n | 100n | ||
| C6 | 100p | 100p | ||
| C7 | 2u2 | 2.2u | ||
| C8 | 22n | 22n | ||
| C9 | 22n | 22n | ||
| C10 | 100n | 100n | ||
| C100 | 100u | 100u | ||
| C101 | 100u | 100u | ||
| Diodes 3 | ||||
| D1 | BAT41 | BAT41 | ||
| D2 | BAT41 | BAT41 | ||
| D100 | 1N5817 | 1N5817 | ||
| ICs 1 | ||||
| IC1 | LM833 | LM833 | ||
| Potentiometers 4 | ||||
| AIR | B25K | B25k | Potentiometer | |
| DRIVE | B100K | B100k | Potentiometer | |
| EQ | C10K | C10k | Potentiometer | |
| VOL | A100K | A100k | Potentiometer | |
| LEDs 2 | ||||
| D4 | 3mm Red LED | 3MM RED LED | ||
| D5 | 3mm Red LED | 3MM RED LED | ||
Other boards based on the JHS Andy Timmons Drive
- Andy Timmons Drive PCBWay: Glory to Ukraine