Enclosure not stated
From the vendor
The Lectric-FX BloozeHound pcb is a DIY overdrive project based on the Boss BD-2 without the Boss bypass switching.
This project is available with or without a matched set of four (4) 2SK117 jfets.
NOTICE: the 2SK117 pinout is DGS. The layout pic in the document shows the pinout on the pcb, but just to be clear, each 117 will be offset one hole from the silkscreen, and will face in the opposite direction.
Schematic
The schematic is in the vendor's build document. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 25 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 11 | ||||
| R2 | 228K | 228k | OCR grid | |
| R4 | 2K2 | 2.2k | OCR grid | |
| R6 | 22k | 22k | OCR grid | |
| R7 | 2K2 | 2.2k | OCR grid | |
| R0 | 122k | 122k | OCR grid | |
| R1 | 15k | 15k | OCR grid | |
| R21 | 1k2 | 1.2k | OCR grid | |
| R22 | 478k | 478k | OCR grid | |
| R24 | 128k | 128k | OCR grid | |
| R29 | 22k | 22k | OCR grid | |
| R26 | 2K2 | 2.2k | OCR grid | |
| Capacitors 12 | ||||
| C2 | 47p | 47p | OCR grid | |
| C4 | 472p | 472p | OCR grid | |
| C5 | 477n | 477n | OCR grid | |
| C0 | 2n2 | 2.2n | OCR grid | |
| C1 | 122p | 122p | OCR grid | |
| C14 | 10n | 10n | OCR grid | |
| C15 | 10n | 10n | OCR grid | |
| C16 | 47n | 47n | OCR grid | |
| C10 | 56n | 56n | OCR grid | |
| C19 | 56n | 56n | OCR grid | |
| C22 | 47U | 47u | OCR grid | |
| C24 | 47u | 47u | OCR grid | |
| Diodes 1 | ||||
| D3 | an4a4s | AN4A4S | OCR | |
| ICs 1 | ||||
| IC1 | Tie? 2 | TIE? 2 | OCR grid | |
Other boards based on the Boss BD-2
- BOSS BD-2 Experimentalists Anonymous
- Blue Steel Madbean · 125B · $12.00