No-Tube Driver

From the vendor

Calling all Gilmour fans. Actually, anyone who likes smooth tube-like drive... How about BK Butler Tube Driver like tones without the tube and associated mains power issues? Here you go. This kit is based on what we believe to be considered the best of the non-tube versions of this tonal titan. This box has a massive range of dirt on tap. At lower gain settings it has a bit of dirt, but cleans up lovely with the guitar volume knocked back a touch. Crank the gain a bit and you've got a Marshall pushed to break up in the room. Higher settings will give you amazing sustain. The EQ will help you get the most from any amp you're pushing. The original pedal uses the LM301AN IC, which is now obsolete and hard to come by. To be honest there's nothing particularly special about it, but we do have a small supply in stock. It sounds great with the OP07 in place, so that's also an option for you. The kit is supplied with vertical-mount pots which have round shafts, so you'll need set-screw fitting knobs. If you want the PCB without parts there's a link for that at the bottom of the page. Partial kit: PCB, all board-mounted components (depending on selected options), pots. Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED. Enclosure (pre-drilled) is available as n option with full kits, and will not take a battery. Knobs are not included. Builds are only available with full kits including enclosure and vertical-mount pots. Please choose appropriate knobs. Inspired by: TD-X Difficulty: Medium PCB size: 50 x 40mm Knobs required: 4 Enclosure: 1590B Direct-Connect compatible (4-way) Download the INSTRUCTION PDF