Bionic Guzz Fun kit - Board-mounted version

From the vendor

Build your own clone of a pretty spectacularly uncompromising fuzz monster. A five-knobber with Level, Fuzz, Filter, Bias and Density controls, as well as a toggle switch to kick in oscillation mode. More fun than a bucket of badgers. The circuit is a bit picky about the input signal, so this works best without a buffer in front of it. Available in a few flavours: • 1590B, single footswitch, mini toggle for oscillation. • 1590BB, as above. • 1590BB with a second footswitch for oscillation. You'll have to sort out your own enclosure if you go for: There's no option for twin footswtiches in a 1590B - it simply won't fit. Optional extra transistors available so you can experiment with making it a bit less gated - these are now MPSA06 and BC517 (which requires a leg twist, but its worth it) - the results are a lot more pleasing than the standard cans. Pots are spaced 21mm apart - take that into consideration when choosing your knobs. Pots and mini-toggle (if selected) are board-mounted for minimal wiring and easy enclosure mounting. If you want the PCB without parts there's a link for that at the bottom of the page. Partial kit: PCB, all board-mounted components, pots. Full kit: As above, plus footswitch and appropriate daughterboard/components for your selected bypass type (see Downloads section for details of those), jack sockets, DC socket, battery snap, hook-up wire, LED. Enclosure (pre-drilled) is available as an option with full kits, and will not take a battery. Knobs are not included. Builds are only available with full kits including enclosures. Please choose appropriate knobs. Inspired by: Supersonic Fuzz Gun Difficulty: Medium PCB size: 100 x 22mm Knobs required: 5 Enclosure: 1590B, 1590BB Download INSTRUCTION PDF