Enclosure not stated · 1 knob
Dunlop Crybaby 95
Based on the Dunlop GCB-95 Cry Baby· 6 other boards clone it
- Category
- Other· Filters Wahs and VCFs
- Controls
- Hot Potz
- Price
- see vendor
- Tags
- Filters Wahs and VCFs
Schematic
The schematic is the archived file. Open it at Experimentalists Anonymous, or browse its folder.
Parts list 22 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 11 | ||||
| ×2 | 1k | 1k | supply dropper and Q3 collector; read from the schematic by eye | |
| ×1 | 1M8 | 1.8M | input buffer bias (buffer only needed with the SPDT switch); read from the schematic by eye | |
| ×1 | 68k | 68k | buffer output series; read from the schematic by eye | |
| ×2 | 10k | 10k | buffer emitter and Q3 emitter; read from the schematic by eye | |
| ×1 | 22k | 22k | Q2 collector; read from the schematic by eye | |
| ×1 | 390 | 390 | Q2 emitter; read from the schematic by eye | |
| ×1 | 1k5 | 1.5k | Q2 base to inductor; read from the schematic by eye | |
| ×2 | 470k | 470k | feedback and Q2-collector bias; read from the schematic by eye | |
| ×1 | 33k | 33k | inductor parallel resistor; read from the schematic by eye | |
| ×1 | 82k | 82k | across the 4u7; read from the schematic by eye | |
| ×1 | 0 | 0 | drawn with one black band (0 ohms); a jumper can be used; read from the schematic by eye | |
| Capacitors 6 | ||||
| ×2 | .22uF | 220n | either side of the Hot Potz pot; read from the schematic by eye | |
| ×1 | .1uF | 100n | supply filter; read from the schematic by eye | |
| ×1 | 220uF | 220u | electrolytic, supply filter; read from the schematic by eye | |
| ×3 | .01uF | 10n | buffer input, Q2 input coupling, feedback; read from the schematic by eye | |
| ×1 | 22pF | 22p | buffer input to ground; read from the schematic by eye | |
| ×1 | 4u7 | 4.7u | electrolytic; read from the schematic by eye | |
| Diodes 1 | ||||
| ×1 | ZL9M3 | ZL9M3 | 9.1V zener; drawing says any 9.1V zener can be used; read from the schematic by eye | |
| Transistors 2 | ||||
| ×1 | MPSA-13 | MPSA13 | input buffer (only needed with the SPDT switch); read from the schematic by eye | |
| ×2 | MPS-A18 | MPSA18 | read from the schematic by eye | |
| Inductors 1 | ||||
| ×1 | 500mH | 500mH | wah inductor; read from the schematic by eye | |
| Potentiometers 1 | ||||
| Hot Potz | 100k | 100k | Potentiometer | wah pot, Dunlop Hot Potz; read from the schematic by eye |
Other boards based on the Dunlop GCB-95 Cry Baby
- Dunlop GCB-95 Cry Baby EfektPol
- Dunlop GCB-95 Cry Baby Effects Layouts (blog)
- Dunlop Crybaby Experimentalists Anonymous
- Dunlop Original Crybaby Experimentalists Anonymous
- Dunlop Dunlop GBC-95 Modded Crybaby Tagboard Effects
- Jim Dunlop CryBaby GCB-95 Tagboard Effects