Enclosure not stated

Dunlop Crybaby

Based on the Dunlop GCB-95 Cry Baby· 6 other boards clone it

Schematic

Check before you build · 2 values the reader of this schematic was not sure of

Ref	Value	Normalized	Type	Notes
Resistors 9
×2	1k	1k		read from the schematic by eye
×1	22k	22k		read from the schematic by eye
×2	470k	470k		read from the schematic by eye
×1	68k	68k		read from the schematic by eye
×1	470	470		read from the schematic by eye
×1	1.5k	1.5k		read from the schematic by eye
×1	33k	33k		read from the schematic by eye
×1	82k	82k		read from the schematic by eye
×1	10k	10k		read from the schematic by eye
Capacitors 4
×2	.001uF	1n		read from the schematic by eye
×1	.0011uF	1.1n		as drawn; supply filter cap; read from the schematic by eye
×2	.01uF	10n		read from the schematic by eye
×1	4.7uF	4.7u		electrolytic; read from the schematic by eye
Diodes 1
D1	1N4148	1N4148		read from the schematic by eye
Transistors 2
Q1	2N3904	2N3904		read from the schematic by eye
Q2	2N3904	2N3904		read from the schematic by eye
Inductors 1
×1	660mH	660mH		wah inductor; read from the schematic by eye
Potentiometers 1
×1	?	?	Potentiometer	wah pot; value printed as '?'; read from the schematic by eye
Switches 1
S1	DPDT	DPDT		true bypass footswitch (two halves drawn); read from the schematic by eye