Enclosure not stated

MXR Distortion +

Based on the MXR Distortion+· 22 other boards clone it

Schematic

Ref	Value	Normalized	Type	Notes
Resistors 4
×5	1M	1M		bias divider (2), bias feed, feedback; plus one more as the dotted click-prevention mod on the input; read from the schematic by eye
×2	10k	10k		read from the schematic by eye
×1	4.7k	4.7k		read from the schematic by eye
×1	2.2k	2.2k		LED; read from the schematic by eye
Capacitors 6
×2	.001uF	1n		input and output; read from the schematic by eye
×1	.01uF	10n		read from the schematic by eye
×1	.047uF	47n		read from the schematic by eye
×1	1uF	1u		25V electrolytic, bias; read from the schematic by eye
×1	1uF	1u		35V tantalum, output; read from the schematic by eye
×1	8-10pF	8-10PF		dotted mod: across the feedback resistor against oscillation; read from the schematic by eye
Diodes 2
D1	1N270	1N270		germanium; drawing suggests 1N34, 1N4148 or LEDs as alternatives; read from the schematic by eye
D2	1N270	1N270		germanium; drawing suggests 1N34, 1N4148 or LEDs as alternatives; read from the schematic by eye
ICs 1
×1	741	741		op amp; read from the schematic by eye
Potentiometers 2
×1	1M	1M	Potentiometer	unlabeled: distortion, wired as variable resistor; read from the schematic by eye
×1	10k	10k	Potentiometer	unlabeled: output; read from the schematic by eye
LEDs 1
×1	LED	LED		status; read from the schematic by eye