Akashic Guitar effects PCB lookup
DISTORTIONVOLUME

1590B · 2 knobs

Aion FX

Aphelion (Legacy)

Based on the MXR Distortion+· 2 other boards clone it

Category
Distortion· Overdrive / Distortion
Controls
Distortion · Volume
Difficulty
Easy
Price
see vendor

From the vendor

One of the first drive pedals to use an op-amp, this classic effect was a favorite of Yngwie Malmsteen, Thom Yorke and Randy Rhoads among many more.

The Aphelion Distortion project is a clone of the MXR Distortion+ and DOD 250+ Overdrive, which are essentially the same circuit with a few different values. The Distortion+ first came out in 1973 and the DOD 250 followed in 1976. Other later variants include the MXR MicroAmp and the DOD YJM308.

This project will allow you to build any historical variant of the Dist+/250. We included three switch mods in this project as well, but you can always leave them off and build a stock circuit.

This was one of the first circuits to use hard diode-to-ground clipping, and while it’s a fairly simple circuit, it serves as an ancestor to other pedals like the Boss DS-1 and Maxon/Ibanez SD-9. It features no tone control; rather, the gain control also changes the tone as you turn it up. It’s capable of a wide range of tones, from slight breakup to gritty distortion.

Schematic

The schematic is in the vendor's build document. Open the build document. No KiCad fragment has been drawn for this circuit yet.

Parts list 22 rows

Report a wrong parse
RefValueNormalizedTypeNotes
Resistors 7
R110k10k
R21M1M
R31M1M
R44k74.7k
R510k10k
R71M1M
R81M1M
Capacitors 6
C11n1n
C210n10n
C347n47n
C54u74.7u
C61n1n
C810u10u
Diodes 3
D21N2701N270
D31N2701N270
D11N40021N4002
ICs 2
IC1LM741LM741
IC2JRC4558JRC4558
Potentiometers 3
DISTORTION500KCC500kPotentiometer
VOLUME100KAA100kPotentiometer
RPD1M1MPotentiometer
LEDs 1
LED1intoINTO

Other boards based on the MXR Distortion+