1590A · 1 knob
Split 'n BlendVerified
Based on the Split 'n Blend· 1 other board clones it
From the post
Got a request for more blend effects, so let's start with a simple one. You can use this as a daughter board to add a blend control to an existing pedal (or incorporate it into something else you're building), or use it as a stand alone blending pedal. 2N5457 should work just fine for both transistors.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Effects Layouts (blog). No KiCad fragment has been drawn for this circuit yet.
Parts list 7 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 2 | ||||
| ×1 | 2.2M | 2.2M | read from the layout by eye | |
| ×2 | 4.7K | 4.7k | read from the layout by eye | |
| Capacitors 2 | ||||
| ×3 | 100nF | 100n | read from the layout by eye | |
| ×1 | 100uF | 100u | electrolytic; read from the layout by eye | |
| Diodes 1 | ||||
| ×1 | 1N4001 | 1N4001 | read from the layout by eye | |
| Transistors 1 | ||||
| ×2 | ? | ? | JFET (G/S/D), value not given; read from the layout by eye | |
| Potentiometers 1 | ||||
| Blend | B100K | B100k | Potentiometer | read from the layout by eye |
Other boards based on the Split 'n Blend
- Split 'n' Blend Tagboard Effects