Enclosure not stated · 1 knobs
Fuzzshine
Based on the Acupulco Gold
- Category
- Distortion
- Controls
- Level
- Price
- $5.00out of stock
- Tags
- store closed
From the vendor
Fuzzshine is a DIY PCB for building the Acupulco Gold.
You'll receive: 1 PCB 1 faceplate 1 3PDT bypass board
See pics for drill guide and BOM.
Schematic
The schematic is in the vendor's build document. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 13 rows
Report a wrong parse| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 3 | ||||
| R1 | 1M | 1M | OCR | |
| R2 | 68k | 68k | OCR | |
| R3 | 10k | 10k | OCR | |
| Capacitors 6 | ||||
| C1 | 10u | 10u | OCR | |
| C2 | 10u | 10u | OCR | |
| C3 | 1u | 1u | OCR | |
| C4 | 1u | 1u | OCR | |
| C5 | 4n7 | 4.7n | OCR | |
| C7 | 100n | 100n | OCR | |
| Diodes 1 | ||||
| D1 | 1N5817 | 1N5817 | OCR | |
| ICs 2 | ||||
| IC1 | LM386 | LM386 | OCR | |
| IC2 | LM386 | LM386 | OCR | |
| Potentiometers 1 | ||||
| LEVEL | A100K | A100k | Potentiometer | OCR |