Enclosure not stated · 2 knobs
La Pelusa Retro Fuzz
Based on the La Pelusa Retro Fuzz
From the post
Ok… now – what the fuck is La Pelusa Retro Fuzz?
It’s Silicon “proprietary chip set” based version of well loved Tone Bender MKII fuzz unit my son!
Nothing to add, nothing to cut…
Layout contains full off-board wiring, and will fit into Hammond “B” type enclosure
.pdf file is here
/span
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at turretboard.org. No KiCad fragment has been drawn for this circuit yet.
Parts list 21 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 11 | ||||
| ×1 | 620R | 620 | ||
| ×1 | 680R | 680 | ||
| ×1 | 1K | 1k | ||
| ×1 | 1,2K | 1.2k | ||
| ×1 | 1,5K | 1.5k | ||
| ×2 | 5,6K | 5.6k | ||
| ×1 | 5,6k | 5.6k | ||
| ×1 | 10K | 10k | ||
| ×1 | 18K | 18k | ||
| ×4 | 100K | 100k | ||
| ×1 | 1M | 1M | ||
| Capacitors 6 | ||||
| ×1 | 100pF | 100p | ||
| ×2 | 10nF | 10n | ||
| ×2 | 100nF | 100n | ||
| ×1 | 1uF | 1u | ||
| ×2 | 4,7uF | 4.7u | ||
| ×1 | 47uF | 47u | ||
| Diodes 1 | ||||
| ×2 | 1N914 | 1N914 | ||
| ICs 1 | ||||
| ×1 | CA3046 | CA3046 | ||
| Potentiometers 2 | ||||
| Attack | B2K | B2k | ||
| Level | A100K | A100k | ||