Enclosure not stated · 3 knobs
Sam Ash Fuzz-Stainer
Based on the Sam Ash Fuzz-Stainer· 5 other boards clone it
From the post
Hammond B-sized enclosure friendly. More of description coming soon
– with on-board bias trimer
– with off-board bias knob
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at turretboard.org. No KiCad fragment has been drawn for this circuit yet.
Parts list 19 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Variant
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 9 | ||||
| ×1 | 220R | 220 | ||
| ×2 | 4,7K | 4.7k | ||
| ×1 | 4k7 | 4.7k | ||
| ×2 | 15K | 15k | ||
| ×3 | 22K | 22k | ||
| ×1 | 22k | 22k | ||
| ×1 | 68K | 68k | ||
| ×1 | 100K | 100k | ||
| ×1 | 1,5M | 1.5M | ||
| Capacitors 5 | ||||
| ×1 | 120pF | 120p | ||
| ×2 | 22nF | 22n | ||
| ×1 | 1uF | 1u | ||
| ×1 | 10uF | 10u | ||
| ×1 | 100uF | 100u | ||
| Transistors 2 | ||||
| Q1 | 2N5173 | 2N5173 | or similar with BCE pinout | |
| Q2 | 2N5173 | 2N5173 | or similar with BCE pinout | |
| Potentiometers 3 | ||||
| Drive | B100K | B100k | ||
| Tone | B100K | B100k | ||
| Volume | B10K | B10k | ||
Other boards based on the Sam Ash Fuzz-Stainer
- Sam Ash Fuzz-Stainer Effects Layouts (blog)
- Sam Ash FuzzStainer Fuzz Dog · 1590B · £28.80
- Rust Bunny Jon Patton · $15.05
- Fuzz Stain PedalPCB · 125B · $8.00
- Sam Ash Fuzztainer Tagboard Effects