Enclosure not stated · 1 knob
VOX Treble-Bass Booster V8401
Based on the Vox Treble-Bass Booster V8401
From the post
Here’s fun little project.
Easily can be squeezed into tinny A type enclosure.
Similar circuit topology could be found in JEN and Elka Treble-Bass Boosters
Get the PDF file here
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at turretboard.org. No KiCad fragment has been drawn for this circuit yet.
Parts list 12 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 7 | ||||
| ×1 | 3k3 | 3.3k | ||
| ×1 | 36K | 36k | ||
| ×1 | 100k | 100k | ||
| ×1 | 180K | 180k | ||
| ×1 | 220k | 220k | ||
| ×1 | 430k | 430k | ||
| ×1 | 1M | 1M | ||
| Capacitors 3 | ||||
| ×1 | 2n2 | 2.2n | ||
| ×1 | 100n | 100n | ||
| ×2 | 220n | 220n | ||
| Transistors 1 | ||||
| Q1 | NPN Si | NPN SI | NPN Silicon | |
| Potentiometers 1 | ||||
| Treble/Bass | B500K | B500k | ||