125B · 3 knobs
Elka Dizzy Tone
Based on the Elka Dizzy Tone· 3 other boards clone it
From the post
Yo! Here’s vero layout for Elka Dizzy Tone!
Very rare vintage fuzz unit. It’s almost indentical to Baldwin Burns Buzzaround – just few components values are changed.
Get the project file [.pdf]
PAGE UPDATE 03/04/2012
Here’s tag board adaptation for Elka Dizzy Tone based on Buzzaround layout (just little smaller – should fit 125b enclosure).
In orginal unit as Q1 and Q2 where used SFT352 (schematic on fsb.org shows hfe around 50) and SFT308 or OC44 as Q3 (hfe around 70).
Enjoy!
b.man
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at turretboard.org. No KiCad fragment has been drawn for this circuit yet.
Parts list 11 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| ×1 | 3,3K | 3.3k | ||
| ×3 | 10K | 10k | ||
| ×2 | 18K | 18k | ||
| ×1 | 150K | 150k | ||
| ×1 | 680K | 680k | ||
| Capacitors 3 | ||||
| ×1 | 1nF | 1n | ||
| ×2 | 100nF | 100n | ||
| ×3 | 25uF | 25u | ||
| Potentiometers 3 | ||||
| Attack | C1M | C1M | ||
| Balance | A4.7K | A4.7k | ||
| Sustain | C250K | C250k | ||
Other boards based on the Elka Dizzy Tone
- Elka Dizzy Tone Dirtbox Layouts
- Dizzy Tone Naegele Audio · 125B
- Elka Dizzy Tone Tagboard Effects