Enclosure not stated · 2 knobs
Colorsound Octivider
Based on the Colorsound Octivider· 1 other board clones it
- Category
- Octave / Pitch
- Controls
- Sensitivity · Bass Volume
- Build
- Vero
- Tags
- 0.1″ pitch stripboard
From the post
Big project on big stripboard piece
Octave down fuzz. Another Colorsound instant classic
It’s smallest I could go, and at this point unverified.
Only for brave people 😉
YT clips kick-balls so one day I’ll be brave
Get your .pdf copy here
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at turretboard.org. No KiCad fragment has been drawn for this circuit yet.
Parts list 23 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 12 | ||||
| ×2 | 330R | 330 | ||
| ×2 | 1K | 1k | ||
| ×1 | 2,2K | 2.2k | ||
| ×4 | 3,3K | 3.3k | ||
| ×4 | 6,8K | 6.8k | ||
| ×7 | 10K | 10k | ||
| ×1 | 22K | 22k | ||
| ×1 | 39K | 39k | ||
| ×3 | 47K | 47k | ||
| ×10 | 100K | 100k | ||
| ×1 | 220K | 220k | ||
| ×5 | 470K | 470k | ||
| Capacitors 8 | ||||
| ×3 | 100pF | 100p | ||
| ×2 | 1nF | 1n | ||
| ×3 | 6,8nF | 6.8n | ||
| ×1 | 10nF | 10n | ||
| ×9 | 100nF | 100n | ||
| ×2 | 220nF | 220n | ||
| ×1 | 22uF | 22u | ||
| ×1 | 100uF | 100u | ||
| Diodes 1 | ||||
| ×3 | 1N4148 | 1N4148 | ||
| Potentiometers 2 | ||||
| Sensitivity | B100K | B100k | ||
| Bass Volume | B100K | B100k | ||
Other boards based on the Colorsound Octivider
- Colorsound Octivider Dirtbox Layouts