Enclosure not stated · 1 knob
Colorsound Fuzz Box
Based on the Colorsound Fuzz Box· 1 other board clones it
From the post
Another instant classic,
Colorsound Fuzz Box, also known as a One Knob Fuzz
Designed by famous Dick Denney in 60’s firstly hit the floor in 1990 as one of the pedals in Colorsound line
Simple and effective build, recently reissued by D*A*M/Macaris combo.
In recent reissue D.Main is using BC109C NPN silicon transistor (BC109 in DAM reissue) in first stage (Q1), and higher gain selected BC108C for Q2.
I also should note the ins and outs. Originally you have them swapped around, my layout shows typical In/Out arrangement to prevent confusion
PROJECT REVISED – missing trace cut fixed, as well as draw with correct 0,15″ pitch vero in mind
Get the project file here [.pdf]
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at turretboard.org. No KiCad fragment has been drawn for this circuit yet.
Parts list 10 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 5 | ||||
| ×1 | 82R | 82 | ||
| ×1 | 1K | 1k | ||
| ×1 | 2,2K | 2.2k | ||
| ×1 | 10K | 10k | ||
| ×1 | 150K | 150k | ||
| Capacitors 4 | ||||
| ×1 | 220pF | 220p | ||
| ×1 | 100nF | 100n | ||
| ×1 | 220nF | 220n | ||
| ×1 | 10uF | 10u | ||
| Potentiometers 1 | ||||
| Fuzz | A500K | A500k | ||
Other boards based on the Colorsound Fuzz Box
- Colorsound Fuzz Box Dirtbox Layouts