Enclosure not stated · 2 knobs
Sola Sound Tone Bender MK1.5
Based on the Sola Sound Tone Bender MK1.5· 2 other boards clone it
From the post
Tone Bender MK I.V.pdf – Very alike to good old Fuzz Face, but sounds not the same. Replica layout, full off-board wiring with shielded wire, as original – no LED, no power supply socket.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at turretboard.org. No KiCad fragment has been drawn for this circuit yet.
Parts list 9 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 4 | ||||
| ×1 | 470R | 470 | ||
| ×1 | 8,2K | 8.2k | ||
| ×1 | 47K | 47k | ||
| ×1 | 100K | 100k | ||
| Capacitors 3 | ||||
| ×1 | 10nF | 10n | ||
| ×1 | 5uF | 5u | ||
| ×1 | 25uF | 25u | ||
| Potentiometers 2 | ||||
| Level | A100K | A100k | ||
| Attack | B1K | B1k | ||
Other boards based on the Sola Sound Tone Bender MK1.5
- Solasound Tonebender Mk. 1,5 Dirtbox Layouts
- Sola Sound Tone Bender MK1.5 Revolution Deux