Enclosure not stated · 3 knobs
Purple Plexi 800
Based on the Lovepedal Purple Plexi 800· 5 other boards clone it
From the post
The gain pot originally is 1kB. Use Reverse Log for beter control over the gain, or stock one if you can’t find it.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at turretboard.org. No KiCad fragment has been drawn for this circuit yet.
Parts list 3 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Only the parts the layout names in its legend are listed: the active parts and the pots. The resistor and capacitor values are printed on the parts in the drawing.
ocr read from an image · sch paired from the schematic · fixed corrected by hand. Check marked values against the build document.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Potentiometers 3 | ||||
| Gain | C1Kocr | C1k | from the layout legend | |
| Freq | B5Kocr | B5k | from the layout legend | |
| Vol | B100Kocr | B100k | from the layout legend | |
Other boards based on the Lovepedal Purple Plexi 800
- Lovepedal Purple Plexi 800 Effects Layouts (blog)
- FuzzPup Pink Plexi Fuzz Dog · 1590A · £30.00
- Lovepedal Purple Plexi 800 Revolution Deux
- Lovepedal Purple Plexi 800 Tagboard Effects
- Purple Plexi 800 Tayda Electronics (DHEA) · $8.00