Enclosure not stated
Marshall Supa Fuzz Mk2
Based on the Marshall Supa Fuzz MK2· 1 other board clones it
- Category
- Fuzz
- Build
- Turret board
- Tags
- Eyelet
From the post
My first take with eyelets 🙂 More to come
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at turretboard.org. No KiCad fragment has been drawn for this circuit yet.
Parts list 1 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Only the parts the layout names in its legend are listed: the active parts and the pots. The resistor and capacitor values are printed on the parts in the drawing.
ocr read from an image · sch paired from the schematic · fixed corrected by hand. Check marked values against the build document.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Transistors 1 | ||||
| Q3 | OC75ocr | OC75 | from the layout legend | |
Other boards based on the Marshall Supa Fuzz MK2
- Marshall Supa Fuzz MK2 turretboard.org