Enclosure not stated · 1 knob
Treble Booster Brian May
Based on the Brian May Treble Booster· 2 other boards clone it
From the vendor
This treble booster is a classic DIY project. Use it to boost the treble and midrange frequencies of the guitar signal while cutting out the low end.
Schematic
The schematic is in the vendor's build document. Open the build document. No KiCad fragment has been drawn for this circuit yet.
Parts list 13 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 7 | ||||
| R1 | 120k | 120k | 120K Ohm 1/4W 1% Metal Film Resistor | |
| R2 | 100k | 100k | 100K Ohm 1/4W 1% Metal Film Resistor | |
| R3 | 1k | 1k | 1K Ohm 1/4W 1% Metal Film Resistor | |
| R4 | 22k | 22k | 22K Ohm 1/4W 1% Metal Film Resistor | |
| R5 | 2.4k | 2.4k | 2.4K Ohm 1/4W 1% Metal Film Resistor | |
| R6 | 6.8k | 6.8k | 6.8K Ohm 1/4W 1% Metal Film Resistor | |
| R7 | 100 | 100 | 100 Ohm 1/4W 1% Metal Film Resistor | |
| Capacitors 4 | ||||
| C1 | 4.7n | 4.7n | 4.7Nf 100V 5% Polyester Film Box Type Capacitor | |
| C2 | 1n | 1n | 1Nf 100V 5% Polyester Film Box Type Capacitor | |
| C3 | 47n | 47n | 47Nf 100V 5% Polyester Film Box Type Capacitor | |
| C4 | 47u | 47u | 47Uf 25V Electrolytic Capacitor 5X11Mm | |
| Transistors 1 | ||||
| Q1 | 2N5088 | 2N5088 | 2N5088 Gerenal Purpose Transistor | |
| Potentiometers 1 | ||||
| Vol | 100k-A | A100k | 100K Ohm Logarithmic Potentiometer | |
Other boards based on the Brian May Treble Booster
- Treble boost PCBWay: Glory to Ukraine
- Brian May's treble booster Tonepad · $8.00