Enclosure not stated
Nine Volt Nirvana Tape Measure BoostVerified
Based on the Nine Volt Nirvana Tape Measure Boost· 2 other boards clone it
From the post
I came across some a bunch of schematics for Nine Volt Nirvana, Joe Gagan's old company. While I haven't found any videos for all of them to get an idea of the tone I can guarantee that if Joe Gagan designed it it's gonna sound awesome.
First up, the Tape Measure Boost. The schematic calls for a trimmer for the volume, I believe the idea is to have it as a set boost inside another pedal or stand alone unit, but I thought it would be nice to have one with a volume pot instead. You can also sub the 2N2222 with any other common NPN Si transistor (2N5088, BC108, 2N3904, etc.)
Original
Added Pot
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.
Parts list 7 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 4 | ||||
| ×1 | 470k | 470k | read from the layout by eye | |
| ×1 | 10k | 10k | read from the layout by eye | |
| ×1 | 100k | 100k | read from the layout by eye | |
| ×1 | 150r | 150 | read from the layout by eye | |
| Capacitors 1 | ||||
| ×2 | 1uF | 1u | electrolytic; read from the layout by eye | |
| Transistors 1 | ||||
| Q1 | 2N2222 | 2N2222 | read from the layout by eye | |
| Trimmers 1 | ||||
| ×1 | 100k | 100k | read from the layout by eye | |
Other boards based on the Nine Volt Nirvana Tape Measure Boost
- Nine Volt Nirvana Tape Measure Effects Layouts (blog) · 1590A
- Nine Volt Nirvana Tape Measure Boost Revolution Deux