Akashic Guitar effects circuit lookup
PRE-GAINGAINVOLUME

Enclosure not stated · 3 knobs

Tagboard Effects

Black Arts Toneworks Revelation Super LeadVerified

Based on the Black Arts Toneworks Revelation Super Lead· 1 other board clones it

Category
Distortion
Controls
Pre-Gain · Gain · Volume
Build
Vero· 17×13· 12 cuts, 4 links
Layout
Verified · Tagboard Effects marks it as built and working
Tags
Black Arts, Distortion, Fuzz

From the post

From the source:

A revelation. Stripped down all out amp pusher. The Revelation has a trio of controls. Pre Gain, Gain, and Volume. LOTS of volume. Pre Gain sets the overall gain level of the device, the gain control dials in the correct amount of distortion and the volume knob absolutely slays the front end of your amp. Think of the Revelation as an extension of your amp’s pre section. Use it to push your amp into super creamy saturation, use it to boost your riffs into full and thick exaggerations of your amp’s base tone. The Revelation does not alter your tone, just makes MORE of it. Choose the Revelation to hammer your amp.

The SuperLead version of the Revelation is a rawer, more aggressive take on the circuit. A bit gnarlier, mid focused, aggressive sound. Specifically tuned for guitar, and baritone guitars, choose the SuperLead for a fuller, fatter, more saturated and aggressive sound.

While there is no schematic for this one I did some comparison between the Black Arts Toneworks Revelation Super Bass and the Pharaoh, and what I noticed is that the values are identical, with the tone control removed. This leads me to be fairly certain that the Black Arts Toneworks Revelation Super Lead is the same concept, but with the values for the LSTR, since the tonal description matches that of the comparisons between the Pharaoh and LSTR. So I figured since I had the layout out to modify it to match the Oath (Black Arts Toneworks Revelation Super Bass without pots) I might as well take the time to change it over to the Black Arts Toneworks Revelation Super Lead as well.

So it's a striped down LSTR without the tonestack.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.

Parts list 16 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 5
×515k15kread from the layout by eye
×3470k470kread from the layout by eye
×3100k100kread from the layout by eye
×3100r100read from the layout by eye
×11k1kread from the layout by eye
Capacitors 3
×3560pF560pread from the layout by eye
×6100nF100nread from the layout by eye
×1100uF100uelectrolytic; read from the layout by eye
Diodes 2
×21N9141N914D1, D2; read from the layout by eye
D31N58171N5817read from the layout by eye
Transistors 3
Q1MPSA12MPSA12read from the layout by eye
Q2MPSA12MPSA12read from the layout by eye
Q3MPSA12MPSA12read from the layout by eye
Potentiometers 3
Pre-GainA500KA500kPotentiometerread from the layout by eye
GainA100KA100kPotentiometerread from the layout by eye
VolumeA100KA100kPotentiometerread from the layout by eye

Other boards based on the Black Arts Toneworks Revelation Super Lead