Akashic Guitar effects circuit lookup
VOLUMETONESUSTAIN

Enclosure not stated · 3 knobs

Tagboard Effects

Mad Professor Amber OverdriveVerified

Based on the Mad Professor Amber Overdrive· 3 other boards clone it

Category
Overdrive
Controls
Volume · Tone · Sustain
Build
Vero· 20×17· 18 cuts, 4 links
Layout
Verified · Tagboard Effects marks it as built and working
Tags
BJF/MP, Overdrive

From the post

Direct from the source:

One of the most sought after guitar tones is a combination of a great overdrive or fuzz pedal into overdriven tube amplifier. Amber Overdrive produces this sound even when running though a clean amplifier. It produces a very thick sound whether playing chords or single notes – fat and juicy with just a hint of fuzz.

Though highly saturated, this dynamic overdrive can be cleaned up with the volume control of your guitar. As with all Mad Professor pedals, it offers a wide range of dynamics and expressive touch sensitivity.

When you plug it into a clean amplifier, Amber Overdrive can give you the massive sound of a saturated amplifier running wide open. It can also be used as a slightly distorted boost to increase saturation on slightly overdriven amplifiers.

NOTICE: Amber Overdrive is a medium input impedance device that places a light load on your guitar pickups to produce a smoother tone. it will work best as the first pedal in the chain. if you run a buffered pedal ahead of Amber Overdrive you will get an increase in treble and upper midrange.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.

Parts list 35 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Check before you build · 2 values the reader of this layout was not sure of
  • 14.7k at column H, rows D-F: printed clearly, unusual value
  • 6.8k at column F, rows B-D: the top of the first digit is partly hidden by the 10uF can, read as 6.8k (could be 5.8k)
RefValueNormalizedTypeNotes
Resistors 15
×3100k100kread from the layout by eye
×3470k470kread from the layout by eye
×21M1Mread from the layout by eye
×215k15kone drawn standing; read from the layout by eye
×28.2k8.2kread from the layout by eye
×2100r100read from the layout by eye
×168k68kread from the layout by eye
×147k47kread from the layout by eye
×122k22kread from the layout by eye
×114.7k14.7kread from the layout by eye
×110k10kread from the layout by eye
×16.8k6.8kread from the layout by eye
×12k2kread from the layout by eye
×1470r470read from the layout by eye
×1150r150read from the layout by eye
Capacitors 9
×3100nF100nread from the layout by eye
×1220nF220nread from the layout by eye
×147nF47nread from the layout by eye
×115nF15nread from the layout by eye
×110nF10nread from the layout by eye
×1470pF470pread from the layout by eye
×1330pF330pread from the layout by eye
×31uF1uelectrolytic; read from the layout by eye
×110uF10uelectrolytic; read from the layout by eye
Diodes 4
D12N38192N3819JFET used as a diode, drain and source connected; read from the layout by eye
D22N38192N3819JFET used as a diode, drain and source connected; read from the layout by eye
D31N40071N4007read from the layout by eye
D41N40071N4007read from the layout by eye
Transistors 4
Q1BC550CBC550Cread from the layout by eye
Q2BC550CBC550Cread from the layout by eye
Q3BC550CBC550Cread from the layout by eye
Q42N54852N5485JFET; read from the layout by eye
Potentiometers 3
VolumeB100KB100kPotentiometerread from the layout by eye
ToneB100KB100kPotentiometerread from the layout by eye
SustainA100KA100kPotentiometerread from the layout by eye

Other boards based on the Mad Professor Amber Overdrive