Akashic Guitar effects circuit lookup
ATTACKVOLUME

Enclosure not stated · 2 knobs

Tagboard Effects

EHX Satisfaction FuzzVerified

Based on the Electro-Harmonix Satisfaction Fuzz· 2 other boards clone it

Category
Fuzz
Controls
Attack · Volume
Build
Vero· 13×9· 6 cuts, 4 links
Layout
Verified · Tagboard Effects marks it as built and working
Tags
Electro Harmonix, Fuzz

From the post

Note that the C7 and the D2-D3 are not present on the original pedal. There are holes ready for those components. Adding C7 as 4n7-100nF cap will increase bass response and adding diode clipping to the place of D2 & D3... Well. That will make this an different animal.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.

Parts list 15 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 4
×218K18kread from the layout by eye
×1150K150kread from the layout by eye
×2560K560kread from the layout by eye
×11M1Mread from the layout by eye
Capacitors 4
×222nF22nread from the layout by eye
×11.5nF1.5nread from the layout by eye
×14.7nF4.7nread from the layout by eye
C7??value not given; not mounted on original unit, legend suggests ~22n for more bass; read from the layout by eye
Diodes 3
D11N58171N5817polarity protection; read from the layout by eye
D2??value not given; not mounted on original unit, legend suggests 1N4148 clippers; read from the layout by eye
D3??value not given; not mounted on original unit, legend suggests 1N4148 clippers; read from the layout by eye
Transistors 2
Q12222A2222Aread from the layout by eye
Q22N39062N3906read from the layout by eye
Potentiometers 2
AttackA100KA100kPotentiometerread from the layout by eye
VolumeA100KA100kPotentiometerread from the layout by eye

Other boards based on the Electro-Harmonix Satisfaction Fuzz