Enclosure not stated · 4 knobs
Bearfoot Emerald Green Distortion MachineVerified
Based on the BearFoot FX Emerald Green Distortion Machine· 2 other boards clone it
- Category
- Distortion
- Build
- Vero· 21×12· 14 cuts, 1 links
- Layout
- Verified · Tagboard Effects marks it as built and working
- Tags
- BJF/MP, Distortion
From the post
Today is Bearfoot day. Info about the original
For the Vox lover in all of us, Bearfoot FX has created the Emerald Green Distortion Machine- a pedal which captures the chimey, crunchy essence of the AC series amps and provides a faithful simulation of the Vox tone through a variety of amps. Used through a Vox, this pedal acts as a booster driver to really push your amp into sonic heaven. The EGDM Distortion and Voice controls are interactive and used together will take you from the low, clean tones of an AC all the way up to the screaming tone of a cranked Vox. The EGDM is extremely responsive to picking dynamics and your guitar’s volume knob.
Bearfoot FX is the brainchild of Bjorn Juhl of BJF Design and Donner Rusk of Donnerbox. Every pedal is handpainted and no two are exactly alike. The pedals now ship with a plain, unpainted bottom plate to help ensure the most secure contact with adhesive Velcro for use on pedalboards. Bearfoot FX pedals are handmade in St. Louis, Missouri, USA.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.
Parts list 28 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
Check before you build · 2 values the reader of this layout was not sure of
- 14K7 resistors (four): printed clearly, unusual value
- 8K25 resistor right of the top 1M: printed clearly, unusual value
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 10 | ||||
| ×4 | 14K7 | 14.7k | read from the layout by eye | |
| ×2 | 330R | 330 | read from the layout by eye | |
| ×2 | 1M | 1M | read from the layout by eye | |
| ×2 | 2K | 2k | read from the layout by eye | |
| ×1 | 47K | 47k | read from the layout by eye | |
| ×1 | 8K2 | 8.2k | read from the layout by eye | |
| ×1 | 100K | 100k | read from the layout by eye | |
| ×1 | 22K | 22k | read from the layout by eye | |
| ×1 | 8K25 | 8.25k | read from the layout by eye | |
| ×1 | 10K | 10k | read from the layout by eye | |
| Capacitors 9 | ||||
| ×1 | 100p | 100p | read from the layout by eye | |
| ×2 | 4n7 | 4.7n | read from the layout by eye | |
| ×1 | 22n | 22n | read from the layout by eye | |
| ×2 | 47n | 47n | read from the layout by eye | |
| ×2 | 220n | 220n | read from the layout by eye | |
| ×2 | 470n | 470n | read from the layout by eye | |
| ×1 | 1u | 1u | drawn as a film cap; read from the layout by eye | |
| ×3 | 22u | 22u | electrolytic; read from the layout by eye | |
| ×1 | 100u | 100u | electrolytic; read from the layout by eye | |
| Diodes 2 | ||||
| D1 | 2A1200 | 2A1200 | legend: 2A1200 (try 1N4001); read from the layout by eye | |
| D2 | 2A1200 | 2A1200 | legend: 2A1200 (try 1N4001); read from the layout by eye | |
| Transistors 3 | ||||
| Q1 | 2N5952 | 2N5952 | JFET; read from the layout by eye | |
| Q2 | 2N1308 | 2N1308 | read from the layout by eye | |
| Q3 | 2N5952 | 2N5952 | JFET; read from the layout by eye | |
| Potentiometers 4 | ||||
| Drive | A50K | A50k | Potentiometer | read from the layout by eye |
| Voice | A50K | A50k | Potentiometer | read from the layout by eye |
| Treble | B50K | B50k | Potentiometer | read from the layout by eye |
| Volume | B50K | B50k | Potentiometer | read from the layout by eye |
Other boards based on the BearFoot FX Emerald Green Distortion Machine
- BearFoot FX Emerald Green Distortion Machine Effects Layouts (blog) · 1590B
- Emerald Green Distortion Machine PCBWay: Glory to Ukraine