Akashic Guitar effects circuit lookup
GAIN

Enclosure not stated · 1 knob

Tagboard Effects

Soulsonic Crackle Not OKVerified

Based on the SoulSonic FX Crackle Not OK· 2 other boards clone it

Category
Boost
Controls
Gain
Build
Vero· 10×7
Layout
Verified · Tagboard Effects marks it as built and working
Tags
Booster

From the post

Requested compact layout as an alternative to the compact SHO.

Martin wrote when sharing the original schematic at Freestompboxes:

Alright, I got it finally figured out... an SHO-style MOSFET boost with NO CRACKLE!!!

I came up with a new gain control for it that allows for the same range of gain adjustment without having to adjust the Source. Since the Source stays fixed, there is no crackling.

While thinking about how to solve this problem, I realized I could treat the basic gain stage as an inverting opamp. So, I set a fixed max gain and tried a variable resistance in series with the input and voila, works perfectly.

Check it out and give it a try; it's a great improvement over the SHO and it's easy to tweak the sound to taste.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.

Parts list 10 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

RefValueNormalizedTypeNotes
Resistors 4
×22M22.2Mread from the layout by eye
×11M1Mread from the layout by eye
×1100K100kread from the layout by eye
×15K15.1kread from the layout by eye
Capacitors 3
×1150n150nread from the layout by eye
×147u47uelectrolytic; read from the layout by eye
×110u10uelectrolytic; read from the layout by eye
Diodes 1
D11N5242B1N5242B / 12V12V zener; read from the layout by eye
Transistors 1
Q1BS170BS170MOSFET; read from the layout by eye
Potentiometers 1
GainC1MC1MPotentiometerread from the layout by eye

Other boards based on the SoulSonic FX Crackle Not OK