Enclosure not stated · 1 knob
Millennium Bypass 2Verified
Based on the Millennium Bypass 2· 2 other boards clone it
From the post
I did this a while ago but when I was searching for it last night I could only find a tag version, so I want this in its own post to direct people to when they want true bypass and LED indication with a DPDT stomp.
This also works fine with a 2N7000 mosfet but it will need rotating 180°.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.
Parts list 3 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 1 | ||||
| R1 | 2K2 | 2.2k | read from the layout by eye | |
| Diodes 1 | ||||
| D1 | 1N914 | 1N914 | read from the layout by eye | |
| Transistors 1 | ||||
| Q1 | BS170 | BS170 | MOSFET; read from the layout by eye | |
Other boards based on the Millennium Bypass 2
- Millenium 2 Bypass Effects Layouts (blog)
- Millennium II Bypass Jon Patton · $3.20