Enclosure not stated · 3 knobs
Ibanez BS10 Bass StackVerified
Based on the Ibanez BS10 Bass Stack· 1 other board clones it
- Category
- Distortion
- Controls
- Distortion · Tone · Level
- Build
- Vero· 19×18· 21 cuts, 8 links
- Layout
- Verified · Tagboard Effects marks it as built and working
- Tags
- Bass, Distortion, Ibanez
From the post
There you go John. We'll never have enough bass designs... This one is basically a Rat for bass.
Thanks to John, this one is now verified. Which also means that the LM7 and FC10 should be safe to build.
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.
Parts list 30 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 11 | ||||
| ×6 | 10K | 10k | read from the layout by eye | |
| ×3 | 1K | 1k | read from the layout by eye | |
| ×3 | 1M | 1M | read from the layout by eye | |
| ×2 | 510K | 510k | read from the layout by eye | |
| ×1 | 22K | 22k | read from the layout by eye | |
| ×1 | 1.8K | 1.8k | read from the layout by eye | |
| ×1 | 100K | 100k | read from the layout by eye | |
| ×1 | 2.2K | 2.2k | read from the layout by eye | |
| ×1 | 470Ω | 470 | read from the layout by eye | |
| ×1 | 200Ω | 200 | read from the layout by eye | |
| ×1 | 56Ω | 56 | read from the layout by eye | |
| Capacitors 11 | ||||
| ×2 | 22nF | 22n | read from the layout by eye | |
| ×1 | 47nF | 47n | read from the layout by eye | |
| ×1 | 1nF | 1n | read from the layout by eye | |
| ×1 | 3nF | 3n | read from the layout by eye | |
| ×2 | 1uF | 1u | read from the layout by eye | |
| ×1 | 100pF | 100p | read from the layout by eye | |
| ×2 | 10uF | 10u | electrolytic; read from the layout by eye | |
| ×2 | 4.7uF | 4.7u | electrolytic; read from the layout by eye | |
| ×1 | 3.3uF | 3.3u | electrolytic; read from the layout by eye | |
| ×1 | 47uF | 47u | electrolytic; read from the layout by eye | |
| ×1 | 100uF | 100u | electrolytic; read from the layout by eye | |
| Diodes 2 | ||||
| D1 | 1N5817 | 1N5817 | read from the layout by eye | |
| ×2 | 1N4148 | 1N4148 | D2, D3; read from the layout by eye | |
| Transistors 2 | ||||
| ×2 | 2N3904 | 2N3904 | BJTs; 2SC1815 in original; read from the layout by eye | |
| ×1 | 2N5457 | 2N5457 | JFET; 2SK118 in original; read from the layout by eye | |
| ICs 1 | ||||
| IC1 | JRC5534DD | JRC5534DD | read from the layout by eye | |
| Potentiometers 3 | ||||
| Distortion | A100K | A100k | Potentiometer | wires labelled Drive; read from the layout by eye |
| Tone | C500K | C500k | Potentiometer | read from the layout by eye |
| Level | A100K | A100k | Potentiometer | read from the layout by eye |
Other boards based on the Ibanez BS10 Bass Stack
- Ibanez BS10 Bass Stack Effects Layouts (blog)