Enclosure not stated · 2 knobs
Kendrick Buffalo PfuzVerified
Based on the Kendrick Buffalo Pfuz
From the post
Geiri's demo of his build:
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.
Parts list 13 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 3 | ||||
| ×1 | 1K | 1k | read from the layout by eye | |
| ×2 | 10K | 10k | read from the layout by eye | |
| ×2 | 100K | 100k | read from the layout by eye | |
| Capacitors 3 | ||||
| ×1 | 47nF | 47n | read from the layout by eye | |
| ×1 | 33uF | 33u | electrolytic; read from the layout by eye | |
| ×1 | 10uF | 10u | electrolytic; read from the layout by eye | |
| Diodes 3 | ||||
| D1 | 1N4001 | 1N4001 | read from the layout by eye | |
| D2 | 1N4001 | 1N4001 | read from the layout by eye | |
| D3 | 1N4001 | 1N4001 | read from the layout by eye | |
| ICs 1 | ||||
| IC1 | NTE941 | NTE941 | legend: NTE941 (LM741 or similar); read from the layout by eye | |
| Potentiometers 2 | ||||
| Gain | B100K | B100k | Potentiometer | read from the layout by eye |
| Volume | B20K | B20k | Potentiometer | read from the layout by eye |
| Switches 1 | ||||
| Boost/Pfuz | SPST | SPST | foot switch; read from the layout by eye | |