Enclosure not stated · 3 knobs
Harrymatic Stutter Distortion
Based on the Harrymatic Stutter Distortion
- Category
- Distortion
- Build
- Vero· 18×9· 15 cuts, 9 links
- Layout
- Unverified · no build reported at Tagboard Effects yet
- Tags
- Distortion, Tremolo
From the post
Request. This one comes from Harrymatic's instructables.com project. Check out the page for more information and demo clip with keyboard. This one has really low part count, but tons of links keep the board pretty big...
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.
Parts list 11 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 2 | ||||
| ×1 | 470Ω | 470 | read from the layout by eye | |
| ×1 | ? | ? | LED resistor, value not given; read from the layout by eye | |
| Capacitors 3 | ||||
| ×3 | 10uF | 10u | electrolytic; read from the layout by eye | |
| ×1 | 220uF | 220u | electrolytic; read from the layout by eye | |
| ×1 | 100nF | 100n | read from the layout by eye | |
| ICs 2 | ||||
| IC1 | LM555 | LM555 | read from the layout by eye | |
| IC2 | LM386 | LM386 | read from the layout by eye | |
| Potentiometers 3 | ||||
| Gain | B100K | B100k | Potentiometer | read from the layout by eye |
| Rate | B10K | B10k | Potentiometer | read from the layout by eye |
| Volume | A100K | A100k | Potentiometer | read from the layout by eye |
| Switches 1 | ||||
| Stutter | DPDT on/on | DPDT ON/ON | toggle; read from the layout by eye | |