Akashic Guitar effects circuit lookup
SUSTAINTONEVOLUME

Enclosure not stated · 3 knobs

Tagboard Effects

Colorsound Jumbo TonebenderVerified

Based on the Colorsound Jumbo Tonebender· 1 other board clones it

Category
Fuzz
Controls
Sustain · Tone · Volume
Build
Vero· 17×14· 15 cuts, 3 links
Layout
Verified · Tagboard Effects marks it as built and working
Tags
Colorsound, Fuzz

From the post

A few people were after this one and as it's pretty close to Colorsound Bass Fuzz, i decided to tweak the layout for a Jumbo. Notes on Phillip Bryant's schematic note that this circuit is apparently 1:1 with Colorsound 3-knob Tonebender re-issue..

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.

Parts list 18 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Check before you build · 1 value the reader of this layout was not sure of
  • 3nF at the bottom right, left of the lower 33K: printed clearly, unusual value
RefValueNormalizedTypeNotes
Resistors 8
×3100K100kread from the layout by eye
×3470K470kread from the layout by eye
×333K33kread from the layout by eye
×3100Ω100read from the layout by eye
×215K15kread from the layout by eye
×28.2K8.2kread from the layout by eye
×110K10kread from the layout by eye
×11K1kread from the layout by eye
Capacitors 5
×7100nF100nread from the layout by eye
×110nF10nread from the layout by eye
×13nF3nread from the layout by eye
×3500pF500pread from the layout by eye
×147uF47uelectrolytic; read from the layout by eye
Diodes 1
×21N41481N4148both labelled D1; read from the layout by eye
Transistors 1
×3BC184CBC184Cread from the layout by eye
Potentiometers 3
SustainA100KA100kPotentiometerread from the layout by eye
ToneB100KB100kPotentiometerread from the layout by eye
VolumeA100KA100kPotentiometerread from the layout by eye

Other boards based on the Colorsound Jumbo Tonebender