Analogman Sunface NKT275Verified

From the post

Positive ground effect so as usual consider using the negative voltage inverter. Info from Analog Mike about his germanium original:

We are now making these in our own cases, as the Analog Man Sun Face . They are hand-built in the USA in small gold boxes, with our own USA made SUNFACE circuit board, which was made small enough to fit in almost any enclosure. As you can see in the picture down below a bit, this is a VERY high quality board of the same type used on our other pedals. It is better quality than almost any other fuzzface clone you will find, with shielding, plated through-holes, etc to meet military specs. It also has an internal CLEAN trim pot (white knob). This trim pot acts just like turning down the VOLUME knob on your guitar, to clean up the fuzz. It can be used to preset the sound as with the volume knob rolled back a bit. It also allows easier control of the volume knob on your guitar when the white CLEAN trim pot is turned a bit. It can also be used to kill Radio Frequency Interference, which may be a problem on high gain pedals in some areas, by turning it down a hair. like all our handmade pedals, the Sunface has true bypass, so when off they do not alter your sound at all. The CLEAN trimpot will also allow the sunface to work better after a vintage style wah pedal, without having to use a foxrox wah retrofit.

2012 Sun Face : in 2012 we started using a brighter, shinier gold box for the smaller Sunface pedals, as seen on the pedal on the right. I like the gold color better. The Z VEX power plate will fit these cases well too.

I'd probably suggest using a 10K for the Sundial. 5K + 2K2 doesn't even equal the usual resistor in that position in a Fuzz Face (8K2) and so I think you want to give yourself a bit extra.

Revised 13-03-2014 to use common single turn trimmer.