Akashic Guitar effects circuit lookup
INTENSITYTONEVOLUME

Enclosure not stated · 3 knobs

Tagboard Effects

Red FuzzVerified

Based on the Red Fuzz· 1 other board clones it

Category
Fuzz
Controls
Intensity · Tone · Volume
Build
Vero· 16×12· 11 cuts, 5 links
Layout
Verified · Tagboard Effects marks it as built and working
Tags
Fuzz

From the post

Another DIY classic. Little info and clips at General Guitar Gadgets.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.

Parts list 17 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Check before you build · 1 value the reader of this layout was not sure of
  • both clipping LEDs are labelled D2 on the drawing; one is presumably D1
RefValueNormalizedTypeNotes
Resistors 5
×210K10kread from the layout by eye
×11.8K1.8kread from the layout by eye
×21M1Mread from the layout by eye
×2470K470kread from the layout by eye
×12.2K2.2kread from the layout by eye
Capacitors 6
×1220nF220nread from the layout by eye
×147nF47nread from the layout by eye
×11nF1nread from the layout by eye
×2100nF100nread from the layout by eye
×13.3nF3.3nread from the layout by eye
×110uF10uelectrolytic; read from the layout by eye
Transistors 1
×1J201J201JFET; read from the layout by eye
ICs 1
IC1LF351LF351read from the layout by eye
Potentiometers 3
IntensityA1MA1MPotentiometerread from the layout by eye
ToneB100KB100kPotentiometerread from the layout by eye
VolumeA100KA100kPotentiometerread from the layout by eye
LEDs 1
×23mm red3MM REDclipping LEDs, both printed D2; read from the layout by eye

Other boards based on the Red Fuzz