Akashic Guitar effects circuit lookup

Enclosure not stated

Tagboard Effects

Dan Armstrong Purple PeakerVerified

Based on the Dan Armstrong Purple Peaker· 2 other boards clone it

Category
Boost
Build
Vero· 18×10· 11 cuts, 6 links
Layout
Verified · Tagboard Effects marks it as built and working
Tags
Booster, Dan Armstrong, EQ

From the post

Another addition to Dan Armstrong library, The Purple Peaker treble booster. This layout is using two SPDT switches instead of the original setup. You could get closer to the original with using 2PDT, taking the ground to pins 2 & 5, Lo wire to pins 1 & 3, and finally Hi to pin 5 - leaving pin 4 unconnected. Personally i would still go with two individual switches... (Yup i know it's the same text i used for the Yellow Humper :))

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.

Parts list 20 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Check before you build · 1 value the reader of this layout was not sure of
  • 500pF ×2 (right half, one at the far right edge, one centre-right): printed clearly, unusual value
RefValueNormalizedTypeNotes
Resistors 8
×4100K100kread from the layout by eye
×251K51kread from the layout by eye
×2470K470kread from the layout by eye
×1150K150kread from the layout by eye
×11M1Mread from the layout by eye
×168K68kread from the layout by eye
×133K33kread from the layout by eye
×14.7K4.7kread from the layout by eye
Capacitors 9
×210nF10nread from the layout by eye
×2500pF500pread from the layout by eye
×1100nF100nread from the layout by eye
×122nF22nread from the layout by eye
×11nF1nread from the layout by eye
×1680pF680pread from the layout by eye
×1100pF100pread from the layout by eye
×1100uF100uelectrolytic; read from the layout by eye
×14.7uF4.7uelectrolytic; read from the layout by eye
Transistors 1
×22N50882N5088read from the layout by eye
Switches 2
HiSPSTSPSTtoggle; or use SPDT lugs 1 & 2; read from the layout by eye
LoSPSTSPSTtoggle; or use SPDT lugs 1 & 2; read from the layout by eye

Other boards based on the Dan Armstrong Purple Peaker