Akashic Guitar effects circuit lookup
GAINTREBLEBASSMIDSLEVEL

Enclosure not stated · 5 knobs

Tagboard Effects

Marshall GuvnorVerified

Based on the Marshall Guv'nor· 20 other boards clone it

Category
Distortion
Controls
Gain · Treble · Bass · Mids · Level
Build
Vero· 21×11· 17 cuts, 3 links
Layout
Verified · Tagboard Effects marks it as built and working
Tags
Distortion, Marshall, Overdrive

From the post

Very similar to the Drive Master posted a couple of days ago, but thought I'd include the full layout to keep things complete. This version with a diode/LED switch as per a request I had. If you'd prefer yours to be like the original and have fixed LEDs rather than this switch, then just solder in LEDs directly on the board as per the Drive Master layout. The 10u cap will need to be moved 3 columns to the right.

Schematic

This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.

Parts list 31 rows

Report a wrong parse

Got parts in a drawer? See what you can build with them.

Check before you build · 1 value the reader of this layout was not sure of
  • 120p next to the IC (left of pin 1-2): small dark text on orange, could be 100p or 150p
RefValueNormalizedTypeNotes
Resistors 11
×247K47kread from the layout by eye
×2680R680read from the layout by eye
×11M1Mread from the layout by eye
×12K22.2kread from the layout by eye
×110K10kread from the layout by eye
×12M22.2Mread from the layout by eye
×1680K680kread from the layout by eye
×11K51.5kread from the layout by eye
×11K1kread from the layout by eye
×1100R100read from the layout by eye
×122K22kread from the layout by eye
Capacitors 10
×3220n220nread from the layout by eye
×3100n100nread from the layout by eye
×210n10nread from the layout by eye
×1120p120pread from the layout by eye
×1220p220pread from the layout by eye
×1470p470pread from the layout by eye
×13n93.9nread from the layout by eye
×168n68nread from the layout by eye
×1100u100uelectrolytic; read from the layout by eye
×110u10uelectrolytic; read from the layout by eye
Diodes 1
×31N41481N4148D3, D4, D5, on the clipping switch; read from the layout by eye
ICs 1
ICTL072TL072read from the layout by eye
Potentiometers 5
GainB100KB100kPotentiometerread from the layout by eye
TrebleA10KA10kPotentiometerread from the layout by eye
BassA10KA10kPotentiometerread from the layout by eye
MidsA10KA10kPotentiometerread from the layout by eye
LevelB100KB100kPotentiometerread from the layout by eye
Switches 1
ClippingDPDT on/off/onDPDT ON/OFF/ONtoggle; read from the layout by eye
LEDs 2
D1red LEDRED LEDon the clipping switch; read from the layout by eye
D2red LEDRED LEDon the clipping switch; read from the layout by eye

Other boards based on the Marshall Guv'nor