Enclosure not stated · 2 knobs
Retro Channel The FuzzVerified
Based on the Retro Channel The Fuzz
From the post
I thought this would be an appropriate place for a reminder of this blogs policy on the Digital Millennium Copyright Act:
DMCA statement: All media used within this site with the exception of linked youtube videos, is the intellectual property of the author, including but not limited to photographs, schematics and interpreted layout diagrams. Manufacturers and product names are mentioned solely for circuit identification, and where applicable their trademarks are the property of their respective owners who are in no way associated or affiliated with the author. No cooperation or endorsement is implied.
This may also be a good place to note that Section 512(f) of the DMCA creates liability for "Any person who knowingly materially misrepresents under this section (1) that material or activity is infringing"
Now that's done ....
This was originally marketed as a proprietary circuit (erm .... Tonebender) which allegedly used a custom designed "Fuzz IC" which presumably therefore no one else would have access to (erm ... CA3046). Now it is apparently a modern take on the MkII, I'm not going to quote the sales spiel directly but you can read all about it here.
As usual I am often keen to emphasise that when a nice sounding effect is released by a good builder you should endeavour to support him and buy his products so he can continue creating pedals. As such I'll be making this one myself.
My interpretation of the circuit and again, company and product name used for identification purposes only. I would also point out that building this will not give you an original Retro Channel - The Fuzz, to obtain one of those you will need to buy one from the manufacturer or one of his appointed resellers. This will only allow you to build a pedal with the same circuit in a smaller box for less money. Enjoy!
"Pirates? What pirates?"
Update 11-08-2012
IC transistor pins
Schematic
This is a board layout, a drawing of where each part goes, and the post may link the schematic it was drawn from. Open the layout at Tagboard Effects. No KiCad fragment has been drawn for this circuit yet.
Parts list 20 rows
Report a wrong parseGot parts in a drawer? See what you can build with them.
| Ref | Value | Normalized | Type | Notes |
|---|---|---|---|---|
| Resistors 9 | ||||
| ×4 | 100K | 100k | read from the layout by eye | |
| ×3 | 5K6 | 5.6k | read from the layout by eye | |
| ×1 | 1K | 1k | read from the layout by eye | |
| ×1 | 1M | 1M | read from the layout by eye | |
| ×1 | 10K | 10k | read from the layout by eye | |
| ×1 | 1K2 | 1.2k | read from the layout by eye | |
| ×1 | 680R | 680 | read from the layout by eye | |
| ×1 | 620R | 620 | read from the layout by eye | |
| ×1 | 18K | 18k | read from the layout by eye | |
| Capacitors 6 | ||||
| ×2 | 100n | 100n | read from the layout by eye | |
| ×2 | 10n | 10n | read from the layout by eye | |
| ×1 | 100p | 100p | read from the layout by eye | |
| ×1 | 1u | 1u | electrolytic; read from the layout by eye | |
| ×2 | 4u7 | 4.7u | electrolytic; read from the layout by eye | |
| ×1 | 47u | 47u | electrolytic; read from the layout by eye | |
| Diodes 2 | ||||
| D1 | 1N914 | 1N914 | read from the layout by eye | |
| D2 | 1N914 | 1N914 | read from the layout by eye | |
| ICs 1 | ||||
| IC1 | CA3046 | CA3046 | transistor array; read from the layout by eye | |
| Potentiometers 2 | ||||
| Attack | B2K | B2k | Potentiometer | read from the layout by eye |
| Level | A100K | A100k | Potentiometer | read from the layout by eye |